News

Marines

Unit Home
1st MLG Leaders
Resources
News
Units
- CLR-1
  - 1st TB
    - 1st TB DRC
  - CLB-1
  - CLB-5
  - CLB-7
  - 1st DSB
    - 1st DSB DRC
- CLR-17
  - CLB-11
  - CLB-13
  - CLB-15
- 7th ESB
- 1st Medical Bn
- 1st Dental Bn
  - Personnel
- 1st Maintenance Bn
  - Chaplain
  - CLC-16
- 1st Supply Bn
Contact Us
Staff Sections
- Principal Staff
- Special Staff
About
- History
- Honors
- Lineage

News

Keyword

Unit

Categories

Sort

Tags

Archive: May, 2021

U.S. Marine Corps Brig. Gen. Bobbi Shea, U.S. Marine Corps Brig. Gen. Bobbi Shea, exchange the Group colors during the 1st Marine Logistics Group change of command ceremony. - U.S. Marine Corps Brig. Gen. Bobbi Shea, outgoing Commanding General, 1st Marine Logistics Group, and incoming Commanding General Brig. Gen. Phillip N. Frietze, exchange the Group colors during the 1st Marine Logistics Group change of command ceremony at Marine Corps Base Camp Pendleton Apr. 29, 2021. Since 1947, Marines and Sailors of 1st Marine Logistics Group have provided direct support through sustained tactical logistics to each element of the Marine Expeditionary Force.

1st Marine Logistics Group Commanding General change of command ceremony

The change of command ceremony is a military tradition that represents a formal transfer of authority and responsibility for a unit from one officer to another. “This is 1st MLG’s day. This isn’t about one person, this is about the unit. This unit which is storied,” said Lt. Gen. Karsten S. Heckl, Commanding General of I Marine Expeditionary Force.

Read More

Cpl. Aiden Bemis, a digital manufacturing engineer with 1st Supply Battalion, 1st Marine Logistics Group, I Marine Expeditionary Force, measures the width of a steering wheel column at Marine Corps Base Camp Pendleton, April 29, 2021. - Cpl. Aiden Bemis, a digital manufacturing engineer with 1st Supply Battalion, 1st Marine Logistics Group, I Marine Expeditionary Force, measures the width of a steering wheel column at Marine Corps Base Camp Pendleton, April 29, 2021. Bemis provided the capability to mass produce a steering wheel remover tool that prevents damage to the steering wheel column during removal. The tool was originally designed by Staff Sgt. Kyle Owens, a motor transportation chief with Combat Logistics Battalion 5, 1st MLG. In 2012, after cracking multiple steering wheel columns using a slide hammer kit, he came up with the idea to drill three holes into a standard washer and weld a nut so that he could effectively remove a steering wheel from the Medium Tactical Vehicle Replacements (MTVR) and Logistics Vehicle System Replacements (LVSR).

Digital engineer turns innovative dreams into reality

MARINE CORPS BASE CAMP PENDLETON, Calif. -- The Marine Corps has actively pursued and awarded the most innovative ideas for years now, encouraging Marines and Sailors of all units and job fields to identify ways to mitigate problems and streamline processes to improve their working environments. Dozens of creative ideas have evolved and are now implemented on the ground to help make the job easier for those service members who face obstacles and challenges in their work centers each day. For motor transport mechanics, an innovative steering wheel remover device is now available to prevent hundreds of tactical vehicles from being deadlined. Last year alone, Marine Corps units submitted 136 requests to replace steering wheels and steering wheel columns that were cracked or broken, rendering Medium Tactical Vehicle Replacements (MTVR) and Logistics Vehicle System Replacements (LVSR) temporarily useless until a new part arrived. “If the part is in stock, the truck can be fixed in about a week,” said Staff Sgt. Kyle Owens, a motor transportation chief with Combat Logistics Battalion 5, Combat Logistics Regiment 1, 1st Marine Logistics Group. “But since the replacement part is a fairly large item, supply doesn’t usually have a lot in stock. When it has to be ordered, it can take weeks or months to come in before our truck is back on the lot.” Marines are most often the cause of the steering wheel cracking because of the tool they use to remove the steering wheel. The 10-way slide hammer kit is a component of the motor transport common B-Kit. It requires a significant amount of pressure to be applied, and then a forced yank in order to release the column. This activity often causes the steering wheel column to crack which renders the steering wheel inoperable and must be replaced. Behind the steering column is the housing for all the lighting wires, so when one of the trucks has a lighting issue that cannot be solved with a simple light bulb change, Marines have to remove the steering wheel to trouble shoot the wire housing unit. Because of the pressure applied to the steering wheel when the pulley is applied, it almost always cracks from the force. “I was a young corporal working on trucks, and I was tired of getting chewed out for breaking the wheel,” said Owens. “I was bored at lunch with my buddy one day and we just started brainstorming a better way we could get the steering wheel off without breaking it every time,” said Owens. There were some discarded tools and pieces of metal around the motor pool, and Owens saw a standard washer that looked about the same size as the center piece of the MVTR steering wheel. With a little creativity, he found a way to use the washer as a customized tool to remove the steering wheel while keeping it intact. “I drilled three holes into the washer and welded a nut to the hole in the middle,” said Owens. “The nut had the proper threading to allow a bolt to be screwed in the middle of the wheel and with enough pressure, it pops the steering wheel right off.” The other two holes were drilled in to the washer to align with the holes in the steering wheel. By screwing two bolts through the washer into the holes in the steering wheel, the washer was fastened securely to the wheel. At that point, Owens screwed a third bolt into the welded nut, and eventually it applied enough force against the steering wheel column to remove the wheel with nothing cracking. “When I realized it worked, I put that washer in my pocket and took it with me to every unit I went to,” said Owens. “Anytime I would see another mechanic trying to remove a steering wheel using the slide hammer, I would toss them my washer and save them from the butt chewing they’d get if they cracked that wheel.” It was 2012 when Owens first started using his handmade tool, and as a young Marine, he never really thought of it as a groundbreaking idea that could be destined for greatness. Eight years later as the chief in his section, he was approached by his unit Innovation Officer who was looking for Marines with good ideas. It was by happenstance that he thought of his washer, which had been used so many times the threading on the nut was almost completely stripped. He asked how he could suggest the idea to get something similar in every single mechanic’s kit so that cracking steering wheels became a thing of the past. “My biggest thing was figuring out if there was a way to make more, so that the lance corporals and corporals under me wouldn’t have to deal with some of the same challenges I did,” said Owens. “If I can help make their life easier, that’s all the matters, because I know what it’s like to be that young Marine getting in trouble for breaking something, and I’m thinking to myself, ‘well how else am I supposed to get the job done?’” Owens’ washer was submitted for the Innovation Challenge, but it was also taken to 1st Supply Battalion’s Digital Manufacturing Team (DMT) with hopes to duplicate the tool and produce more as a resource for other motor pools. Cpl. Aiden Bemis, a digital manufacturing engineer with 1st Supply Bn., provided the capability to make Owens’ dream a reality. Through intense training and a background in Computer Aided Design (CAD), Bemis has perfected the art of reengineering to exploit today’s technologies and gain a Marine Corps advantage. He took the device and began designing the replica blueprint for mass production. “What the DMT does is identify parts in the supply chain with long lead times that break often and cost a lot of money that we can produce for way less,” said Bemis, who has helped save the Marine Corps more than $50k through additive manufacturing. Originally a field radio operator, Bemis is now part of a small group of Marines in the Process Reform Office who use CAD to take an established item and reengineer it to replicate with 3D printing. “We reverse engineer a finished product and revert it back to a 3D model with accurate measurements for printing,” said Bemis. Using a 3D scanner, Bemis was able to scan Owen’s gadget to record the exact measurements required for printing. The first model was made of plastic and broke the first time it was tested. Additionally, the diameter was small and the drilled holes were off center, since the original device was built from a standard washer. “The measurements on the initial prototype didn’t match the exact location of the holes on the truck itself,” said Bemis. “My biggest obstacle was simply getting a more precise location of all the holes.” After a few more minor adjustments to the precision and material needed for the 3D printing job, the ultimate version was completed and tested with success. The final tool was printed with 17-4 steel, and popped off its first steering wheel with ease and most importantly, no damage. “There were four prototypes total before we got the finished product,” said Bemis. “Once the prototype was finalized, I printed four batches.” Each batch takes about a day to print, and consists of 36 steering wheel removal devices. One device weighs about half a pound, and its metal is completely solid. It costs an estimated $65 to print one, and around $150 to replace the steering wheel of an MVTR or LVSR. For more information on the Process Reform Office, additive manufacturing, or to obtain one of the steering wheel removal devices, contact Mr. Robert Broussard at robert.w.broussard@usmc.mil.

Read More

Unit News Archive

August 2023 (1)

February 2023 (2)

January 2023 (1)

December 2022 (1)

November 2022 (1)

October 2022 (1)

February 2022 (2)

October 2021 (1)

September 2021 (1)

August 2021 (1)

February 2021 (1)

December 2020 (1)

August 2020 (6)

December 2017 (1)

December 2016 (1)

November 2016 (3)

October 2016 (4)

September 2016 (2)

August 2016 (1)

February 2016 (3)

January 2016 (2)

December 2015 (5)

October 2015 (2)

September 2015 (10)

August 2015 (2)

February 2015 (2)

January 2015 (2)

December 2014 (3)

November 2014 (1)

October 2014 (2)

September 2014 (5)

August 2014 (7)

April 2014 (13)

March 2014 (12)

February 2014 (16)

January 2014 (12)

December 2013 (16)

November 2013 (6)

October 2013 (18)

September 2013 (13)

August 2013 (14)

April 2013 (12)

February 2013 (6)

January 2013 (5)

December 2012 (4)

November 2012 (7)

October 2012 (7)

September 2012 (7)

August 2012 (8)

April 2012 (25)

March 2012 (20)

February 2012 (1)

November 2011 (7)

October 2011 (16)

September 2011 (15)

August 2011 (16)

February 2011 (9)

January 2011 (17)

December 2010 (20)

November 2010 (32)

October 2010 (24)

September 2010 (11)

August 2010 (12)

April 2010 (22)

March 2010 (18)

February 2010 (6)

January 2010 (7)

November 2009 (10)

October 2009 (1)

September 2009 (2)

February 2009 (3)

January 2009 (6)

December 2008 (18)

November 2008 (3)

October 2008 (5)

September 2008 (10)

August 2008 (13)

March 2008 (12)

February 2008 (14)

January 2008 (1)

January 2007 (6)

December 2006 (14)

November 2006 (9)

October 2006 (15)

September 2006 (8)

August 2006 (12)

April 2006 (12)

March 2006 (12)

February 2006 (5)

January 2006 (6)

December 2004 (3)

October 2004 (15)

September 2004 (13)

August 2004 (17)

April 2004 (11)

February 2004 (6)

January 2004 (1)

September 2003 (2)

August 2003 (6)

February 2003 (5)

February 2002 (1)

Marine Corps News

Toys for Tots
December 6, 2023

Enhancing Tactical Communications
December 4, 2023

Vipers and Heavy Haulers Return Home from Indo-Pacific Deployment
December 1, 2023

World War II Era Marine Laid to Rest with Silver Star Honor
November 30, 2023

NETT Positive
November 29, 2023

1st Marine Logistics Group